Pasta Pierogi Press
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.71 – €5.75 net (excluding VAT)
For file: Pasta Maker 8cm_0.2mm_PETG_MK3S_5h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.23 excluding VAT (range midpoint).
- Weight reported by the author
- 73 g
- Print time reported by the author
- 5.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Super solid pasta and pierogi press with cutter. Diameter 10 cm / 4 inch.
- Rating
- 4.857 / 5
- Likes
- 920
- Downloads
- 2,481
- Makes
- 23
- Views
- 12,119
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing parameters:
Material: PETG
Resolution: 0.2 mm
Perimeters:
part 1/2 and cutter: 4
part 3/4: 10
part 5/6: 15
Supports: only part 5/6 overhang
Assembly:
Fix hinge parts with superglue (e.g. Cyanoacrylate)
First add parts 5 and 6 to part 2
Set part 1 to closed position
Then add parts 3 and 4
For other volumes scale all parts:
scale = cubic root of volume scale
80% = half volume
125% = double volume
etc.
Related models: