1 / 2
Corner-Cleat 100 - 160 (Klampe)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cleat in various lengths (100 mm - 160 mm) for use on corners
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 2
- Views
- 363
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I remixed my own cleat to use at corners. The original cleat was modeled by Wilko
You can choose between 100 mm to 160 mm in steps of 10 mm. The holes stay the same diameter, but change in distance. So be carefull not to drill the holes and change the cleat then.
Use 5mm counter sink screws.
I also uploated the Solidworks model for your own modifications.
You will need support for printing the model.
If you like the model you can buy me a coffee. :)