Dishwasher Slider Corners
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement corner feet for the wire frame trays used in commercial glass washers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
An exact replica of the plastic feet that come on the wire glass wash racks used in bars and restaurants. We had a tough time getting hold of replacements and rather than buy a whole new set of plastic trays, I figured I could print these for next to nothing. I drew up the design in Fusion 360 as an exact replica of the originals, but removed the filleting on the bottom edge to make it easier to print. I experimented with materials:
PLA is a no go as it will soften and warp in the machine
Nylon is strong but I found they took on water and rapidly deteriorated (also expensive)
ABS works well if you're used to working with it, but the geometry is prone to warping.
I had best results with PETG, printed with a 0.6 nozzle and 0.3 layers, printed quickly and it's nice and stiff so they clip on nicely.
I had a super cheap spool of unbranded brown box Chinese “white” PETG on the shelf that prints a nasty off-white/cream colour, but I found this actually gave the best results for this job.