Self-watering square planter (fix)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.37 – €0.45 net (excluding VAT)
For file: indicator_0.2mm_PLA_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 33.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Square planter with a water reservoir and a water level indicator that can be printed without any supports.
- Rating
- 5 / 5
- Likes
- 89
- Downloads
- 626
- Makes
- 12
- Views
- 2,368
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts.
With its self-watering feature, this planter makes it easy to keep your plants hydrated without the hassle of constant watering. Add a touch of elegance to your outdoor or indoor space.
When printed with heat-resistant filaments, this planter is built to last and withstand the elements. Its rectangular shape is perfect for fitting into tight spaces or lining up along a wall or fence.
Upgrade your gardening game with this easy-to-use and stylish self-watering square planter.
Changes
- outer shell
- increased "chimney" height by 5mm to match the rectangular model
Note: without the proper height, the indicator will touch the bottom and will still be showing, indicating wrong water levels - added missing aligners for the indicator inside the "chimney" to keep the indicator always straight
- increased "chimney" height by 5mm to match the rectangular model
- inner shell
- increased syphon hole to match the rectangular model (30.4x30.4mm)
- decreased overall size to match the tolerances of the rectangular model
original sizes didn't have much tolerance and would be difficult to
work with
Printing
Outside Shell/Floater - I would recommend reading the watertight article on prusa3d.com
Inner shell - This doesn't require much work since we will rely on the outside shell being watertight, 0.3mm layer height, default settings
Indicator - Should be as light as possible, 1 perimeter, 0.2mm layer height, no infill
Credits
Mikolas Zuza, https://www.printables.com/model/57885-self-watering-rectangular-planter-with-optional-la
pavel.d7, https://www.printables.com/model/64634-floater-upgrade