Engraver Inset for MultiPen Holder for Cameo 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an inset to use my MultiPen Holder for Cameo 4 as an engraving tip.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is an inset to use my MultiPen Holder for Cameo 4 as an engraving tip.
Since the parts are very filigree and with low tolerances, ABS-Like Resin printing is recommended! The parts are not optimized for FDM printing (but it should also be possible if your printer is set up well).For FDM printers, the note at the bottom may help...
What else you need:
- 1x Dremel engraving tip 9924 or 9929
- 1x screw M3 x 20 mm (DIN 912)
- 1x MultiPen Holder for Cameo 4
Please note that these are not original Silhouette accessories, so using them can invalidate the guarantee. An engraving function is not provided for the Cameo Plotter. Use is at your own risk.
This might help you with FDM printing:
Since well-adjusted FDM printers also have the property of printing the inside diameter a little too small, this setting may help to compensate for this. Unfortunately, we don't have much space for tolerances here.
- Ultimaker Cura:
Walls -> Hole Horizontal Expansion - PrusaSlicer:
Print Settings -> Advanced -> Slicing -> XY Size Compensation