Pool Wall Conduit Fixture
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.02 – €2.47 net (excluding VAT)
For file: Formwork_Fixture_AstralPool_0.6n_0.4mm_PETG_MK3S_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 1.35 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fixture for mounting Astral Pool wall conduit on formwork.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 1
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I have designed this fixture to hold my Astral Pool wall ducts (15663) in place in an appropriate cutout in the formwork block. After pouring concrete, the formwork adapter can be disassembled and reused. Since I concreted my pool in two steps, I only had to make 4 formwork adapters for a total of 8 wall penetrations.
For assembly, two planks are still needed as formwork, one has to be drilled with a 17 mm hole and one with a 59 mm hole. Furthermore, screws for fastening the formwork holder (e.g. 3.5 x 25 mm), an M16 screw, an M16 nut and a 2" locknut are needed.
Additional thread insert
The Thread_Insert_1_5zoll model is an alternative thread insert, for built-in parts with 1.5" thread.