1 / 2
Dome Camera Wedge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting wedge for dome camera.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
A 30 degree wedge for a dome camera, when mounted to a wall to change angle a bit more. The dome camera base needs to be about 110mm in diameter, and holes are 120 degrees apart. I printed without support in ABS, but other should work based on your application.
I used 13% Gyroid infill seemed to be quite sturdy.
I used threaded inserts and M3x8 screw to attach my camera on to the wedge. The order of assembly.
- mount wedge to wall or surface.
- mount camera ring and body to wedge
- mount camera dome cover on everything.