1 / 4
Semi - Print in Place Epicyclic Gear - Kinetic Art — image 1
1 / 4

Semi - Print in Place Epicyclic Gear - Kinetic Art

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A fun 3D printing exercise

Rating
0 / 5
Likes
11
Downloads
51
Makes
0
Views
1,047
Reviews
0

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a posting for only the epicyclic gear at the top of my kinetic artwork featured in the cover photo. The larger piece will have it's own posting (eventually) and will credit the maker of the Seiko Ratchet mechanism which I remixed. 

I left 0.3mm tolerances between each printed in place component. The printed screws thread in with 0.1mm tolerance. 

Print 3 of the ‘15z Gear w_screw’ and 1 of each of the other components. 

 

Semi - Print in Place Epicyclic Gear

https://youtube.com/shorts/mFkpHc1ALEM?feature=share

Epicyclic Gear Flower_Kinetic Art Project: 
https://youtube.com/shorts/XMa_mD37bI8?feature=share



Print settings

  • Recommended to print slow and cool (60mm/s @ 198 degrees, PLA)
  • 0.2 (or smaller) layer height


Gear references

  • Module - 1.5mm
  • Pressure Angle: 14.5 degrees
  • Height - 6mm 
  • Smaller gears are 15z
  • Larger gear is 30z

 

Assembly

  • Align the 3 prongs from the ‘Gear Base’ to the slots on the ‘Cyclic Handle’ and press in. These are press fit with 0.1mm tolerance. If needed, trim or sand the prongs until they press into their slots. 
     
  • Connect the ‘Gear Base’, ‘Cyclic Handle’, and larger 30z gear with an M3 bolt (30mm or longer). 
     
  • Screw the ‘15z Gear w_screw’ into their slots on the Cyclic Handle. 



 

 

 

Tags