Samsung Freestyle Ceiling Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ceiling mount for a samsung freestyle beamer, which allows the beamer to be quickly mounted and dismounted.
- Rating
- 4.667 / 5
- Likes
- 98
- Downloads
- 2,571
- Makes
- 3
- Views
- 11,732
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
A ceiling mount for a samsung freestyle beamer, which allows the beamer to be quickly mounted and dismounted. The beamer should easily fit in and stay there.
If the model is printed with PETG, it is strong enough to hold the beamer, but you can support the material by inserting a hex wrench or similar into the side after you insert the beamer.
Print Settings:
Material: PETG
Layer high: doesn't matter (I printed with 0.4mm)
Supports: No
UPDATE: I have added a second model where the distances within the bracket are smaller to minimize the movement of the projector. As a result, there should now be only 0.5mm of space remaining. Please note, I didn't printed V2 by now – so it's not tested.