1 / 6
2x3p programming connector for OpenSprinkler 3.2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is programming/flashing connector for OpenSprinkler 3.2 BoM: pin header 2x3 wires (4 or 6 colors) dupont female…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is programming/flashing connector for OpenSprinkler 3.2
BoM:
- pin header 2x3
- wires (4 or 6 colors)
dupont female pins (4 or 6 pcs)
### Post-Printing- print connector case
- bent pins on 2x3 pin header (as shown on image)
- solder wires
- crimp dupont pins on other end
- put pin header to casing and fix with hot-glue gun
Print instructions
Rafts: No
Supports: No
Resolution: 0.15mm
Infill: 100%
Filament: PM PLA
Notes:
Print-time: under 30 min