non-MMU print-in-place dishwasher sign clean/dirty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a non-MMU remix of Printschnitzel.at's "print-in-place dishwasher sign clean/dirty".
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 93
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Just a non-MMU remix of Printschnitzel.at's "print-in-place dishwasher sign clean/dirty".
I printed the model at 130% scale due to I thought the model looked a little small.
The signs clean/dirty has the letters slightly recessed so you can use a fine tipped marker to colour in the letters.
I have also edited the unbinding key to be flat on the bottom so it is easier to bang the key on a flat surface (I insert the key and hammer down on the print with a mallet).
Their are two versions of the file which is “Magnets” the same as the original file where their is a gap for inlaid magnets with size 9.6x24x2.1mm. And their is “No_Magnets” which just removes that gap and replaces it with infill that slightly decreases print time.