1 / 2
Top Camera Spacer for LumenPnP with v3 linear rails with 4x m2 bolts for the cameramount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A different top camera spacer that keeps the original bold but add's 4x m2 bolts to mount the camera.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
I ran into the same problem that the top camera was very low.
The spacer by @jm moves the camera up 4mm but i did not have M2,5 bolts that were 4mm longer.
So instead i used some random M2 screws (they can be sourced from an old laptop or appliance) to mount the camera. The original lumenPnP bolts mount the spacer and lights and sit flush so the camera can be mounted on top.