Twotrees Sapphire Plus Motherboard Cooling Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgrade of the original mainboard cooling solution of the Twotrees Sapphire Plus
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 47
- Makes
- 0
- Views
- 1,022
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Since the printer already comes equipped with 2 4010mm fan, we can use them in a smarter way.
This model is a very fast, print-and-install upgrade for the Sapphire Plus
I also included a print modifier you can use to get the same effect as I did (grid on the top). If you also want to use it, in Cura you can just upload the 2 models and center them; the modifier is created in such way that shares the same center as the print, to get a very precise alignment. For PrusaSlicer, you need to upload the model and then upload the modifier as a custom print modifier.
Cura settings I used for the modifier:
- Set the modifier as “modify setting for overlaps” and select “cutting mesh”.
- Set wall count to 2 with “alternate extra walls” active to give more strength to the infill.
- Set top and bottom layers to 0.
- Modify the infill as you prefer.
- Limit the infill speed to get a good result (60mm/s instead of default 100mm/s for me).
Materials:
- 2*4010 fans
- 4-8*M3x12mm screws for mounting the fans onto the print
- 4-8*M3 hexagonal nuts for mounting the fans onto the print
- 2*M3x8mm screws to fix the mainboard to the original mounts
- 2*M3x35mm screws to secure the top part
Printing tips:
- Set a high minimum layer time to limit the speed, so that the mounting legs have a good dimensional accuracy of the screw guides and spacers.
If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.
https://ko-fi.com/addictivemanufacturing