Plain Coffe Table Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and Plain Cofee table Lamp
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 124
- Makes
- 0
- Views
- 816
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Designed to be used with ~20mm lamp head with screw ring.
2 Shades included 12.5 cm and 10 cm. however feel free to design your own.
Print Settings
Shade
Print the shade in Vase Mode with line width 0.6mm using either 0.4 or 0.6 nozzle.
I recommend keep the bottom layers 1 just wait long enough print bed to cool enough in order not to damage the print.
Since there is no opening for ventilation either use a very low wattage bulb for PLA usage or better print with PETG.
I have used PLA as I use it as dim light.
Base and Bottom Plate
I recommend PETG but PLA works as well if your not planning to use high wattage bulbs.