Rotational Stand - Planetary Gears
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a display stand with an inbuilt planetary gearbox, that allows you to reduce the turning speed.
- Rating
- 3 / 5
- Likes
- 13
- Downloads
- 39
- Makes
- 1
- Views
- 499
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Rotational Stand - Planetary Gears
This is a display stand with an inbuilt planetary gearbox, that allows you to reduce the turning speed. There are two types, a 2:1 gear ratio, and a 4:3 gear ratio.
Design Purpose:
This design allows you to display an item on it, and rotate it with minimal effort. To use it, twist the outer ring (Silver in my picture) and the upper gold plate( Known as the Display Plate) will spin in the same direction, but slower.
Additional items required for this print:
Standard Skateboard Bearings 3x (you can 3d Print these, at THIS LINK)
Print Settings:
15% infill, 0.4 layer height.
Optional:
Print the base at higher infill so it holds to the ground better.