1 / 2
European Robin Statue
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A photogrammetry model of a European Robin statue, mounted on a log and baseplate
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 253
- Makes
- 2
- Views
- 838
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution
A photogrammetry model of a European Robin statue, mounted on a log and baseplate.
To print:
- Infill 15%
- 0.4mm recommended (but I printed mine with a 0.6mm nozzle, and it managed it alright)
- PLA / PETG / any hard plastics
- 0.1 - 0.15mm layer height
- 2 perimeters for a 0.6mm nozzle, 3 for a 0.4mm nozzle
- No supports needed
- Draw custom seams around the bird to avoid the beak, otherwise you will end up with blobbing (Suggested screenshot from PrusaSlicer attached)
Specs:
- X and Y width: 35mm
- Z height: 27mm
Printed in SunLu Silk Magic PLA (Blue & Red)