1 / 4
Makita DC18SD mountingbracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.65 – €2.02 net (excluding VAT)
For file: Makita DC18SD Holder_0.8n_0.4mm_PETG_MK3S_1h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.83 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 1.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Some mounting extensions for the Maktia DC18SD Charger.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 104
- Makes
- 0
- Views
- 969
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Small brackets to mount a Makita DC18SD charger to a wall.
Do this one by one for each mountingbracket
- remove the rubber
- You need to remove the original case screws
- put the bracket
- replace the original screw with a 4mm x 50mm countersunk woodscrew (cut the woodscrew to ~42mm (with the head)
- Now you can screw the charger on the wall or wherever you like.