1 / 4
16mm Vape Stem Funnel / Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel / stand for any 16mm outer diameter vaporizer stem such as the Tinymight 2.
- Rating
- 4.5 / 5
- Likes
- 10
- Downloads
- 150
- Makes
- 1
- Views
- 838
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
A small funnel for filling vaporizer 16mm stems, filling doob tubes, or as a stand. The overhang is designed for 16mm outer diameter and 14mm inner diameter, which fits Tinymight stems perfectly.
Extra Details
- Modeled in Fusion 360
- Tested on Bambu X1C with PLA and PETG
- Suggested settings
- 100% infill
- 0.12 layer height
- 0.15 first layer height
- seam aligned
- Uses 4.66g filament
- I suggest lightly sanding with fine grit sandpaper to smooth out the inside of the cone, but don't sand the bottom of the funnel, the print lines provide a little friction that keeps the funnel in place nicely