1 / 3
Welsh Dragon Power Outlet Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a power-outlet cover that has the Welsh Dragon imprinted.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 74
- Makes
- 0
- Views
- 393
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Filament - Inland PLA PRO Black and Silk Gold
- Diameter - 1.75mm
- Extrusion Multiplier - 1
- Density - 1.25
- Nozzle Temp - First Layer - 219*C , Other Layers 219*C
- Bed Temp - First Layer - 57*C , Other Layers 57*C
Infill
- 25%
- Rectilinear
- 600% anchor
- 100% anchor length
- Top/Bottom is Concentric
- Combined every 20 layers
Supports
- - Gcode has supports painted on the middle 0.075" for screw spacing with Top Z contact set to 0.2 Detachable
Misc Settings
- Solding Layers - Bottom 2, Top 4
- Perimeters - 3
- Layer Height - 0.15mm
- First Layer Height - 0.25mm
- Thick Bridges - Yes
- Detect bridging perimeters - Yes
- Fill Gaps - Gaps
- Seam Position - Aligned
- Perimeter Generator - Arachne
- Fuzzy Skin - No
- Ironing - Enabled , All top surfaces, 12% Flow Rate and 0.1mm between ironing passes
- Skirt 5 Loops at 6mm distance and 1 layer height
Speed Settings
- Perimeter - 60mm
- Small Perimeter - 15mm
- External perimeter - 50%
- Infill - 80mm
- Solid Infill - 20mm
- Top Solid Infill - 12mm
- Support material - 60mm
- Support material interface - 100%
- Bridges - 60mm
- Gap Fill - 15mm
- Ironing - 20mm
- Travel - 130mm
- Z - 0mm
- First Layer Speed - 30mm