1 / 4
Hex Wrench / Allen Key Foldable Holders Metric & SAE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foldable holders for Metric and SAE hex wrenches /allen keys.
- Rating
- 4.5 / 5
- Likes
- 30
- Downloads
- 239
- Makes
- 2
- Views
- 1,526
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
3/14/24: Updated the Metric holder: Added a slot for a #12, adjusted the key tolerances to fit more smoothly than the original, and cleaned up the F3d file (However, the F3d still has some issues when attempting to re-adjust keyhole diameters).
-------------------
Foldable Hex Wrench / Allen Key Holders:
- Metric holds 14 keys
- SAE holds 13 keys
This is modeled after the foldable holder that came with my Wera Hex Plus sets, which only hold 9 keys each. I wanted something similar to hold all of the sizes that I have.
Please Note:
- Tolerances are tight. I printed with a .6 nozzle at .2 layer height. Test prints with the same nozzle and .3 layer height had slightly different results. I suggest using the “Slice Test” files first to dial in your printer before printing the final holders.
- Holders are printed in TPU with 100% infill for extra rigidity (and also in case of the need for very slight carving adjustments with an Xacto Knife). I printed horizontally and used supports.
- Latch should use a rigid filament like PETG. No supports are needed if printed vertically. It is small - 100% infill does not use much filament.
- Fusion 360 and/or STEP files are attached in case you need to make adjustments.