10 Cent Puzzle - Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nice puzzle! But unfortunately it can not be transported so easily with the € 1 Cents.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Nice puzzle! But unfortunately it can not be transported so easily with the pennies (€-Cents). The pennies fall around, or you do them in an extra container. Somewhat uncomfortable, constantly the worry about the pennies!
A suitable case, that would be a solution!
Designing a suitable case has its problems, of course. It should fit tightly, so that the tablet can not slip out.
The outside cent piece does not need a cover, as it fits very tightly. It also serves as a tab to pull out the tray.
The cover must be printed upright. So ensure a good grip on the printing plate!
Remark: As all parts are designed to fit very precisely, it may happen that you have to rework one or the other part a bit with sandpaper and/or cutter due to different dimensional accuracy of the printers and the different behavior of the filaments.
Dimensions:
Width tray (printed): 62.7 mm
Interior width case (designer): 63,5 mm
Height tray (printed): 4.1mm
Interior height case (designer): 4.5 mm
As different trays exist, I have attached the "Coin Tray" file from KamikazeGrandma here.