OpenRC F1 2023 Car - Full Part Set
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.25 – €0.30 net (excluding VAT)
For file: Front_Wheel_Axle_0.2mm_PETG_MK3S_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 21 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
All Parts to build a 2023 OpenRC F1 Car! Repersent your favorite team, or build a racecar with friends!
- Rating
- 4.875 / 5
- Likes
- 1,648
- Downloads
- 6,201
- Makes
- 44
- Views
- 39,314
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
STEP Files added!
Original Designs by Daniel Noree
Remix based on OpenRC F1 2022/2018/2017/2015
OpenRC F1 AERO Package: https://www.printables.com/model/469356-openrc-f1-aero-2223
For hardware needs please look here: http://danielnoree.com/the-openrc-f1-build-guide/
Key Differences to 2022 parts
- Wheel Rims have increased details
- Rear Wing Mount more in line with 2022/23 spec
- Front Floor now with more detail
- Mirrors updated to match 2023 spec
- Updated Center Body Section to help with retention of Lid
- Drill Hole through Groove in Lid down into center body for 2mm screw on either side and use to retain lid
- Updated Front Wheel Hubs for stability
- Minor Updates to Shark Fin so it more easily interfaces with the lid
--Recommendations--
Print the Front Wheel Axle on its side, included print file shows recommended orientation
Use M3x20 bolt to secure Front Wheel Hub to Front Wheel Axle, this improves Strength!
If Parts come in not properly scaled (ie to small), scale all parts by 2540% (This is the Metric to English Conversion)