Kobra Go Neo top Z Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
by : Thumquas Just reposting this to printables Like the design and find it helped with my printer a bunch kobra Neo
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 296
- Makes
- 3
- Views
- 1,137
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Wanted a Z support that didn't get in the way of the extruder on the Kobra Go, you never know when you'll need that extra height.
It fits over and in the 2 recessed holes for the top bar which will help keep it in place.
It uses a standard skateboard bearing (22mm diam) I believe its a 608. Push in the bearing right after printing and slide it right on the top of the printer.
The top bar of the Kobra Go is plastic so fit should be correct/close but adding some tape or double sided tape on the inside to snug it up should help.
Print Settings
Printer:
Kobra Go
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
at least 20% and a strong pattern