Dehydrator Rim Height Extension - Filament Drying
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sidewall height extension for round Lumina Dehydrator to allow you to fit your filament spool.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I use a Lumina dehydrator to dry filament but don't want to cut out the middle of the trays to fit the filament in, so here's an extension that sits on the rim of a tray to extend the height of your dehydrator.
I've included two versions: one with 30mm wall height and one with 60mm wall height.
I've cut it into quarters to fit on the print bed. You can also stack the pieces for extra height.
I've included the Fusion 360 file so you can either alter the diameter dimensions or increase/decrease the wall height.
I haven't bothered gluing or taping the quarters together as very little air escapes, but that's easily done, or you could remix the design to include overlapping lips.
On my dehydrator, the middle of the rim is approx 307mm
I've printed mine at 0.3mm in PETG and with supports on.