Dial Mount for CR10V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dial Gauge mount for CR10 V2 or any other printer with 20 mm track frame.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a set of two Dial Gauge mounts for a 20mm T track printer like the CR-10V2 and similars.
One mount will help you to calibrate Z axis movement and the second will help you calibrate X axis movement. You can reuse the Z axis gage to calibrate the bed movement but you might have to use a clamp to attach it firmly to the frame and get the gauge level with the bed.
I followed the advice of Teaching Tech and calibrated the movement of the axis, not a printed part.
There is a pocket on the thicker arm for a 5mm nut. Make sure the flat part of the pocket is up so it is easy to add the nut and seal the space.
You will need two M5 x 50mm screws and one M5 x 20mm screw to attach the gauge. You will also need three M5 nuts. It is not needed but I add an M5 washe to keep the screw from wearing out piece.