.308 Winchester Cartridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
.308 Winchester Cartridge with mechanical drawing sketches and modifications to be used as Snap Caps.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 178
- Makes
- 1
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar but not identical to the 7.62×51mm NATO cartridge.
Printing Tips
Print with random seam positioning (Prusa Slicer > Print Settings > Layers and perimeters > Advanced > Seam position > Random).
Model Format
The model is available in .STL .STEP and Fusion360 (.F3D) format.
- STL and STEP files can be used in your typical Slicer Software like PrusaSlicer
- The F3D format contains the original sketch for easy customization in Fusion360
Use as Dummy Round / Snap Cap
3D printed models based on CIP cartridge dimensions are not ideal to fit or be used in real guns. Printed with non-elastic filaments like PETG or PLA, the cartridge is going to break if hit by the bolt. To create usable Snap Caps, I made the modified version (-MOD).
The -MOD file is a modified version with the following changes:
- Modifications for better printability
- Slightly smaller dimensions to fit into real guns
- Primer Pocket (Print LR.stl using flexible Filament like FilaFlexible40 as a primer. If you don't have a reloading press, you might want to scale it down to 96%)
- Drill Hole (7/64 or 3mm) inside the Primer Pocket. The Drill hole is intended to be fixed on a drill to sand and polish the model, creating a nice looking shiny finish.