Vertical laptop stand (Laptopständer)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.86 – €3.50 net (excluding VAT)
For file: Laptop-stand_L_0.25mm_PLA_MINI_2h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.18 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 2.55 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A lightweight stand for up to four devices. Eine schlanke Halterung für bis zu vier Geräte.
- Rating
- 2 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 628
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A lightweight design of a vertical laptop stand that can hold up to four devices.
The left (L) and right (R) sides are connected with a 12 mm diameter copper tube - but anything else can be used (wood, carbon rod). The width of each piece is 15 mm, the depth roghly 160 mm. The length is variable through the tube you use.
In the picture shown are two iPads with ~ 17 mm thickness and a laptop with ~ 19 mm thickness.
Printed laying flat with PLA with standard settings in draft mode. 4 perimeters!
***
Feel free to remix the design, I added the .f3d file for that purpose.
Extrude it more than 15 mm to use it as a standalone piece or adjust the dimensions of the radius.
***