Filament Extrusion Measurement Rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a device to be used before your extruder that makes it easier to straight, mark and measure with a caliper in…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a device to be used before your extruder that makes it easier to straight, mark and measure with a caliper in order to check and calibrate your extrusion steps/mm.
Update:
Now there is a hole to put a piece or lenght of 4mm OD PTFE tube and better clearance for the filament. Also two versions with 100mm and 125mm gap!
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
25%
Filament:
Generic PLATransparent
Notes:
Designed with 0.3 (or 0.15) layer height in mind.
Category: 3D Printer Accessories