Mill Vise Speed Handle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.17 – €2.65 net (excluding VAT)
For file: visehandle-handle_02mm_pla_mk3s_2h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.41 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.7 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This speed handle was made for the 4" (100mm) vise I use on my bench-top mill.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 114
- Makes
- 0
- Views
- 899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Note [April 28, 2024] : See the remix below for a version with a stronger crank handle :
https://www.printables.com/model/861178-mill-vise-speed-handle-remix-modified-crank
This speed handle was made for the 4" (100mm) vise I use on my bench-top mill. Of course different vises have different sizes and shapes for attaching a vise handle, so this may or may not work for your vise.
My vise came with a long metal detachable handle, but this is inconvenient to use when setting up material in the vise. This speed handle is intended to be used to make it easier to initially position work in the vise as it makes it easier to tighten or loosen the vise as necessary; after that the metal handle can be used for final tightening of the vise.
Note that the crank handle on this is fixed (non-rotating), as I opted to keep the design simple.
Here is more information on my vise :
https://sites.google.com/site/lagadoacademy/machining---lathes-mills-etc/review---milling-vise
The handle fitting for the vise is hexagonal - 15mm across the flats and 25mm long.
The OnShape 3D CAD file for this :
Print instructions
Print in PLA using the 3mf file provided; otherwise:
I printed over-all with 10% linear infill and 2 perimeters, but I used modifiers to add additional infill and perimeters around the socket, and additional perimeters for the crank handle.