1 / 2
Service rockers, Voron V2 & VT/V1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"Rockers" so you can tilt your printer safely on it's back/side to service it.
- Rating
- 5 / 5
- Likes
- 136
- Downloads
- 681
- Makes
- 13
- Views
- 3,128
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Voron VT & V2 Service rockers
CHANGELOG
- 29.04.2023: Braces, to help with som sideways stability i've made a couple braces to "pop-in" to the lower rear extrusion that help prop up the service supports.
- 20.04.2023: Tweaked the logo a bit so it's more pronounced and the MM prints better.
- 18.04.2023: Initial release.
Description:
- I've added the posibility to have the voron logos in an accent color, also fixed a couple faults in the design, added some filets/champfers and redesigned the print-in-place support.
- I'm adding both a plane/solid version (no accent colored logo), and one mulit material.
Printing:
- Default voron settings (i used adaptive cubic infll @40% to save some print time), correct orientation, no supports needed!
Bom:
- 4x M3x8mm BHCS (or SHCS)
- 4x M3 T-slot nuts (T-nut)
The braces:
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!