Reolink VideoDoorbell Mounting Wedge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement wedge for the Reolink video doorbell. Tipped 15 degrees left and 5 degrees up, flared.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 78
- Makes
- 0
- Views
- 2,452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
My doorbell is kind of low, and has a lot of damage/unpainted around it. The Reolink doorbell comes with a 15-degree wedge, but I wanted it tipped up also, high enough I could see faces of people standing at the door. I also wanted cover the unpainted areas. So now I have one that's flared at the bottom, tips 15 degrees left, five degrees up, and has screw holes exactly where the previous screw holes already were. Modeled in Blender, with way too many prototypes. ;-)
Rather custom, but maybe the .blend template of the camera side could be useful to someone. It's not too hard to move around the holes or change the tilt if you're 10% good with Blender.
You should probably re-slice it for your printer even if it's the right shape, as my gcode has a fair bit of customization.