Simple ruler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ruler that will do most things a store-bought one will do. Very simple design. 15cm total.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 81
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
for when you really need a simple half centimeter increment ruler and don't want to go buy one.
this design is made to be printed with a 0.4mm nozzle (0.6mm works too) and pla. it is simple and quick and shouldn't be a problem to print fast as long as you have a good first layer.
putting in your regular pla settings with around a 0.2-0.3mm layer height should work fine.
the g-code provided is for 0.6mm nozzle the picture for this model was taken from printing this g-code on a ender 3 pro using ziro green PLA pro at 0.28mm layer height taking 43 minutes to print.
leave a like/make if you found it useful and check out my other designs :)
if you like my work, consider donating :)
https://ko-fi.com/jobis