1 / 1
Reverse Bowden System ( QSM-M5 ) for Prusa MK3 - Redesigned filament sensor cover - For Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since the Prusa Enclosure does not come with the right MK3 FS-Cover, i decided to design my own.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 535
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Compatible with Prusa MK3.
This part is designed to fit the standard brass insert that comes with the Enclosure Kit, which unfortunately does not fit the MK3 out of the box.
Therefore you'll need to harvest the insert from the original part.
Instructions:
- Print the cover.
- Remove the brass insert from the cover given with the Enclosure Kit (you can use an exacto knife, pliers, tweezers, soldering iron).
- Hot press the insert into position using a soldering iron.
After that you can screw in the QSM-M5 to attach the PTFE tube.
The insert slot is 7.5mm wide and 3.5mm deep.
