Parametric magazine holder for Leshiy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a parametric magazine holder. The images of the closed box show the 2nd iteration -- the first iteration had…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 51
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a parametric magazine holder. The images of the closed box show the 2nd iteration -- the first iteration had slightly too tight tolerances on the hinge mechanism.
You will need some sort of spine (rod) material to hold it together, and you will need to customize the rod hole diameter to match whatever rod material you have.
The unit can be customized to hold any number of magazines, but without substantial editing you won't want to go any lower than 2. This is because the binding that holds it together creates 2 binding holes (one for each side) for every magazine. I.e. if you only print for one magazine the binding will be flimsy. Perhaps I'll edit that later on to ensure there are 2n+1 binding mounts, n on one side, n+1 on the other, so that it will work for n=1.
Category: Sport & Outdoors