Yasuhara Nanoha lens cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lens cap for the Yasuhara Nanoha 5:1 super-macro lens. This lens does not come with a cap, and it's unlikely…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a lens cap for the Yasuhara Nanoha 5:1 super-macro lens. This lens does not come with a cap, and it's unlikely many people have need of a cap, given the nature of the lens. But in the off-chance you do have need of a cap, this is for you.
I've included the OpenSCAD file I used to design the cap. So you can modify any of the parameters if you feel the need.
I printed this at 50 microns on a Formlabs printer with no scaling using a standard white resin. I imagine if you use different resins, or a different 3d printer type, you might need to tweak the parameters a little. Printing as I did on the formlabs, it required no sanding, just careful removal of the supports.
Print Settings
Printer:
Formlabs Form 3
Rafts:
Yes
Supports:
Yes
Resolution:
50 micron
Filament:Formlabs white resin but pretty much anything would work. Resin How I Designed This ===================
White cap, snapped onto the lens.
White cap upside-down, so you can see how it snaps onto the lens using: the lens hole, the subject mount recesses, and the screw recesses.
Category: Camera