1 / 3
IR3 V1 TBG-Lite Direct Drive Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A direct drive mount for the IR3 V1 for the TBG-Lite (also LGX Lite)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A direct drive mount for the IR3 V1 (I believe the older IR3 also uses the same mount) for the TBG-Lite (which also uses the same mounting points as the LGX Lite I believe).
You will need the following:
BOM
- Three 3x8mm FHCS Screws
- Two 3x16mm SHCS
Printing Instructions
Does not need any supports and you should print with at least 5 walls and 50% infill.