Flow test from CNC kitchen (remix to add height modifiers in 3mf file)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a "remix" (actually just the same stl as 3mf file that includes height modifiers) for the CNC Kitchen flow test
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 194
- Makes
- 0
- Views
- 933
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
This model just contains additional height modifiers (and a scaled Z axis to height 60 mm) in 4 mm steps (15 steps total) to allow testing a lot of flow rates. To use, chose a layer width and layer height (I have a 0.6 mm nozzle, so I chose 0.6 mm width and 0.3 mm height), then decide on your flow rate steps (e.g. I did 2 mm^3/s steps from 2 to 30 mm^3/s) and calculate the speed required to reach the flow rate according to this formula:
print speed = flow rate / (layer width x layer height)
In other words:
Flow rate = print speed x layer width x layer height