1 / 5
Beacon Mount Sovol SV06
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beacon 3D scanner mount for Sovol SV06.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 80
- Makes
- 1
- Views
- 1,819
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Not compatible with SV06 stock part cooling fan. Several rear-mounted parts cooling fan mounts available on this site. I use a 5015 fan. I use the low-profile beacon model.
Remove stock Z probe & mounting bracket.
Required Hardware:
- M3x5mm heat insert for blind hole (blind hole is 10mm deep, so insert heights other than 5mm will work too)
- M3 hardware that ships with Beacon - I used one short to mount to the heat insert and had to shorten the longer screw with a grinder to mount to the bottom of the extruder
- Can re-use existing M3 screw that held the mounting bracket for the stock Z probe
For beacon section in klipper config:
X offset: 0
Y offset: -17.42