Rock Band 4 Drum Head Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We've enjoyed Rock Band 4 (xbox version) over the years, but the drum kit has taken a beating.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 92
- Makes
- 1
- Views
- 1,369
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
We've enjoyed Rock Band 4 (xbox version) over the years, but the drum kit has taken a beating. Some of the rings that retain the rubber on the drum heads have broken, and the others are breaking. This is a 200mm Rock Band 4 Drum Head Retainer to replace the broken ones. I printed four new ones, each matching the color of the drum.
To fix the drum, you need to pull the pad off. There are no screws, just a few rubber plugs. Pulling the drum apart feels like you're going to break it. You do need to be careful not to pull so hard that you yank the wires out when it comes free. Search youtube for demonstrations.
STL and 3MF files are in here. Feel free to remix or whatever.
Print instructions
This is an easy print. It's 200mm, so make sure your plate is big enough (won't work for mini's unfortunately). No need for supports or fill, or anything like that.