Clicker plate (Hoyt)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clicker plate designed for Hoyt Avalon-riser but might fit on other (Hoyt-) risers too.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 117
- Makes
- 0
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Ckicker plate
designed for Hoyt Avalon-riser but might fit on other (Hoyt-) risers too.
I had an orignal clicker-plate but it was too short.
I found this one https://www.thingiverse.com/thing:2005898 designed by asr93 but it did not really fit 100% on my bow ...
I also wanted to add stripes/marks that made it easy to read (and taking note of) the clicker-setting.
(You can "read" where, what line or mark, your clicker cuts in the centre, top or bottom of the clicker.)
The dimentions are the same as the original plate, .. but longer.
Printed it myself out of metal-PLA and it was just nice :)
UPDATE (feb, 5th '18):
Found that dimensions were not correct.
Designed, priunted and mounted a new one: same design as clicker-plate 2, which performed as expected: just a regulare clicker-plate but with stripes which make it easy to "read" setup., but new dimensions.
See Clickerplate_3.STL
Print instructions
Category: Sport & Outdoors Summary
Ckicker plate
designed for Hoyt Avalon-riser but might fit on other (Hoyt-) risers too.
I had an orignal clicker-plate but it was too short.
I found this one https://www.thingiverse.com/thing:2005898 designed by asr93 but it did not really fit 100% on my bow ...
I also wanted to add stripes/marks that made it easy to read (and taking note of) the clicker-setting.
(You can "read" where, what line or mark, your clicker cuts in the centre, top or bottom of the clicker.)
The dimentions are the same as the original plate, .. but longer.
Printed it myself out of metal-PLA and it was just nice :)
UPDATE (feb, 5th '18):
Found that dimensions were not correct.
Designed, priunted and mounted a new one: same design as clicker-plate 2, which performed as expected: just a regulare clicker-plate but with stripes which make it easy to "read" setup., but new dimensions.
See Clickerplate_3.STL
Print Settings
Notes:
No need for supports obviously. A brim might help to prevent warping.