Big Red Switch (IBM XT Style) with magnetic latching
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Well... a Big Red Switch, what else? ;)
- Rating
- 0 / 5
- Likes
- 73
- Downloads
- 80
- Makes
- 0
- Views
- 1,182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3x 8mmx3mm circular magnets
1x M4x40mm screw and a nyloc nut (or two standard nuts) are needed to lock the lever
2x M3x40mm and two nuts are for the microswitches
2x quite “standard” microswitches (cherry, omron, or almost everything else, see picture)
Numbers should be printed in contrasting colors and pushed into the body's grooves, or the grooves can be filled with paint.
The lever can be printed with a translucend material (as the one in the video), there is a hole for a 5mm LED on the body side.
Assembly is a little tricky, a thick paper shim will help to hold the two body magnets in place while sliding the lever with the third magnet from the back. Or just superglue them in place, but the CLICK will be less satisfactory ;)
Item in action: