1 / 1
IKEA Skadis Stand for Heavy Funko Pops — image 1

IKEA Skadis Stand for Heavy Funko Pops

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stand for Ikea Skadis to support heavier Funko Pops

Rating
0 / 5
Likes
7
Downloads
33
Makes
0
Views
676
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I liked Nifnifs file, but found the stand failed on the upright due to the weight of my Funko Pops. I reduced the weight and thickness of the stand and ran a longer universal hook through the stand and it has been working better for my heavier models.

The stand uses about 30% less material than it's ordinal, but it still is slightly weak on the upright connection. Make sure to file down the hook top so it goes into the stand smoothly as this will lessen the chance of failure. I am using 3 walls to keep some strength in the part.
Make sure the hook is 100%, it should take most of the weight so the stand is for support. From testing, 2 hooks can support a model without the stand as well.

Resolution: 0.2

Supports: Yes

Infill: Stand:25% , Hook: 100%

Tags