42 - Version32
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.09 – €2.55 net (excluding VAT)
For file: 42e-drape_02mm_pla_mk3s_2h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.32 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.18 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
The Answer.
Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
This one : 42 Drape
This print was an attempt to simulate a cloth draped over the Answer. It took numerous attempts in 3D CAD to get a reasonable approximation of this, but the many failed attempts were useful as I learned something from each one. In the end, I did not fully succeed in getting the effect I was looking for, but I think I came pretty close.
In addition, I also learned a bit more about 3D printing techniques and advanced slicer settings (see Print Instructions).
OnShape 3D CAD files :
Print instructions
Use the provided 3mf files to print in PLA. Otherwise :
- 10% rectilinear infill
Note that gcode is provided for two different resolutions, 0.2mm and 0.15mm layers.
I wanted to try printing with 0.15mm layers, both to see if it would improve the final print, andf also to see if I could resolve an issue I have experienced with 0.15mm layer printing. Specifically, when I printed with 0.15mm layers the print would initially seem to working, but after a while the filament stopped extruding and got stuck in the extruder (resulting in a chewed up filament). In an attempt to correct this problem I increased the "other layers" temperature setting from 210 to 225 degrees and was able to get a successful print.