Raspberry Pi Squeezebox case v 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Raspberry Pi PiCorePlayer Squeezebox and display.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 639
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Case designed to fit a Raspberry Pi, touch screen display and speakers.
This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/
The speakers - https://shop.pimoroni.com/products/5w-4-ohm-65mm-full-range-speaker
Speaker Bonnet - https://www.adafruit.com/product/3346
Buttons - https://thepihut.com/products/180-piece-ultimate-tactile-button-kit
Button caps - https://thepihut.com/products/black-soft-caps-for-tactile-buttons-1-pack
IR receiver - https://thepihut.com/products/ir-infrared-receiver-tsop38238
Light sensor - https://www.adafruit.com/product/4681
I removed the QT-QWIIC sockets from the light sensor to allow it to fit flush with the top.
All items printed at 0.2mm layer height with a 0.4mm nozzle. No supports
The M3 holes in the 2 side panels are 2.7mm to allow for the bolts to tap a thread except for the ones to attach the front which are M3 clearance holes.
All sides need to be printed with the outside face against the print bed.
Holes for bolts are M3.