Tamiya TL-01 Chassis Resistor Mount Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for the location where a mechanical speed control resistor would normally go when not installed.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 63
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a Tamiya TL-01 chassis R/C, are not using the old school mechanical speed controller with a ceramic resistor and want to plug the hole this is for you. These plates fit the TL-01 early and later model chassis variants. The early one has a smaller recess and very thin screw bosses, and uses the flatter plate design. While the later variant has a larger recess and 5mm tall bosses that are actually lower down on the chassis as well. See the pics for examples.
I've included 6 models: 2 of each earlier and later variants with full logo and stars only ready for multi-color printing, and earlier and later variant blank plates.
***UPDATED 2023-05-31***
I've re-exported the 3MF files from Bambu Studio using the generic 3MF option due to compatibility problems with other slicers.