1 / 2
Ball Joint (Rod End) for m5 screws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My design of printable ball joint. Ball hole is 5.1mm Rod hole is 4.9mm (should be threaded with m5 tap for easy screw…
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 455
- Makes
- 1
- Views
- 1,525
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
My design of printable ball joint.
Ball hole is 5.1mm
Rod hole is 4.9mm (should be threaded with m5 tap for easy screw in.
Rod hole length is 20mm
Ball / housing spacing is 0.6mm
No support needed
Those settings worked best on Zortrax m200 with Z-Ultrat filament (ABS based)
Print Settings
Printer Brand:
Zortrax
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.14
Infill:
50%
Filament: Zortrax Z-Ultrat Pink
Category: 3D Printing