Apple
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.34 – €0.42 net (excluding VAT)
For file: applejoin-thread_02mm_pla_mk3s_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 30.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This one is mostly for fun, but also to try out some ideas in 3D CAD as well as printing a multi-part print in…
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 702
- Makes
- 8
- Views
- 3,873
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This one is mostly for fun, but also to try out some ideas in 3D CAD as well as printing a multi-part print in multiple colors. There are five parts total for this print.
The OnShape 3D CAD files for this are here :
Print instructions
Print in PLA using the 3mf files provided.
You can of course print in any colors you like, but for a realistic look these are the colors I chose:
- red : apple top and bottom
- brown : stem
- any color : connecting screw
- red and green : leaf
The leaf can also be printed in all green, but I chose to use two-color printing with filament switching to print the base of the leaf to match the apple top.
The leaf requires a lot of support material. The leaf stem is delicate so take care removing the support material so as not to break the leaf stem.
I printed the stem (brown) with a brim, which meant I needed to do a bit of trimming with a razor knife to remove the brim completely. It might be possible to print this without a brim but I did not try this.