IDÅSEN Table Hanging Headset Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.20 – €2.69 net (excluding VAT)
For file: IDASEN_Hanger_0.2mm_PETG_MK3S_2h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.44 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 2.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple, clean, and easy-to-mount headset holder for Ikea's IDÅSEN table.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
A simple headset holder for Ikea's IDÅSEN table. Thanks to the curved and smooth shape of the design, it is very strong while still being light and easy to print. It also looks better than most of the other designs ;p.
Mounting
It is very easy to mount, using the pre-drilled holes Ikea kindly left under the desk. A screwdriver from the side will be able to screw it in. If your bit is slipping, try a bigger one.
Parts needed
- 2 x 109568 screws
These are the same screws used to mount the controller on the other side of the desk. You can get them for free at your Ikea store or through Ikea's Website.
Printing Instructions
Print on its side for best results.
- Supports: none
- Infill: 15%
- Perimeters: 3
- Material: I used PETG. PLA should be fine as well
- (Optional) Variable Layer Height: On
Remixing
STEP and Fusion360 files are included for easy remixing. Please respect the license attached.
If you are unable to remix the file, leave a comment and I will do my best to help :).