Scrap bin for PrusaMini
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.65 – €4.46 net (excluding VAT)
For file: prusamini_skuffe-v1_02mm_pla_mk3s_3h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.06 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 3.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This scrap bin is hold in place by powerfull magnets, so it is very easy to remove and install.
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 191
- Makes
- 1
- Views
- 1,701
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This scrap bin is hold in place by powerfull magnets, so it is very easy to remove and install. It snaps into place by itself..
There are two small (Ø10x3mm) magnets embedded into the print, and two round magnets (Ø20x3mm) with countersunk holes mounted to the frame of the Mini. (it would also be enough just to mount two washers to the frame)
The magnets are mounted with two T-nuts and two M3x10 screws.
(T-nuts are printed in Prusament PC Blend. ...find them on Thingiverse)
Print instructions
The print will stop at 30,6mm height, to insert the magnets.
Printed in Prusament Galaxy Black PLA.
Printed on Prusa MK3S
0.2 layerheight
215° Nozzle
45° Bed.
(had some problems with bedadhesion with this filament. Lowering the bed-temperature helped!)