Prusa Mini Fun extruder shield
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.74 net (excluding VAT)
For file: myprusaeyes_02mm_petg_mini_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 54 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A full heat shield around the nozzle - the fun way! A small wall between the M.I.N.D.A.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 67
- Makes
- 1
- Views
- 1,649
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A full heat shield around the nozzle - the fun way!
A small wall between the M.I.N.D.A. probe and the nozzle
And a snap on cover with holes for googly eyes
First of all, huge credit to the original designers:
@Skreelink - I've based this remix on his V2.
@Mathieu - I've based this remix on his V3.
All I did was to make sure that those two parts can fit well together.
and I've also added holes for googly eyes (12.3 mm diameter). Snap fit, no glue needed.
I've added my own logo on one, but really use the regular one.
There is a link to the source model files in Tinkercad as well.
3MF files are added with my custom supports.
But you can use the STL as normal.
G Codes are only for time and cost estimation, please don't use it. every printer is different, and you should NOT trust g codes you find online.
Print instructions
supports are needed.
please look at the 3MF file to see the custom painted one
DO NOT PRINT THE GCODE FILES, they are for time and cost estimation only.
PETG seems like the logical choice.